Aico Intumescent Downlight Firecover 200mm AFF109200

Building Regulations confirm that when a hole is cut into a fire rated ceiling to fit a downlight, the fire stopping ability of the ceiling is impaired. In the event of a fire, flames could penetrate through the light fitting and spread to the floor above with the subsequent risk to life and property. The downlight itself can also be a source of fire due to the high temperature of lamps and the promixity to flammable material.

To provide total peace of mind and total protection, a Firecap downlight cover should be installed over the light fitting if the ceiling is a fire separating element. Firecap will stop the spread of fire for at least 60 minutes.

When Firecap downlight covers are fitted as part of the ceiling structure they become in effect a permanent fixture. This means that the fire protection with Firecap remains even when fashion may dictate a change of light fittings.

• Suitable for use with all commonly used ceiling types, joist constructions and lamp types including “cool beam” dichroic and aluminium reflector lamps
• For use with a wide range of mains and low voltage light fittings
• Easy to install from above or below the ceiling without requiring an accurate hole. No screws, drilling or additional sealant required
• Self supporting, flexible and lightweight
• Tested and approved for use on both plasterboard and suspended ceilings
• Fully ventilated to avoid over-heating of the light fitting
• Reinstates acoustic protection of the ceiling - items tested have satisfied requirements of Building Regulations Document E under test conditions
• When exposed to fire the intumescent fibre swells to over three times its original thickness to provide a highly effective fire-stopping seal
• Keeps all combustible material away from the hot light fitting
• Provides a high level of additional heat insulation to the ceiling void during a fire thus reducing the chances of ignition of accumulated dust and flammable materials
• Specially formulated high performance outer coating improves durability and minimises thermal convection
• Conserves energy - reduces heat within the room from escaping through the light fitting
• Multiple cable entry points on the side and top for ease of installation
• Fibres used are exonerated from classification according to HSE guidelines
• Rot, corrosion and vermin resistant
• Maintenance free
• Light fitting can be removed without disturbing the Firecap